Abbott Precision XceedPro Betreibershandbuch PDF herunterladen (Seite 17)

Title (with LTR): Precision Xceed Glucose Procedure (LTR19678)

Last Approved: Gregory, Kimberly (Electronic Signature Timestamp: 8/11/2014 3:20:23 PM)

The monitor is shipped from the factory

without configuration. This screen will

appear the first time you turn on the meter

after receiving it.

Contact the POCT Coordinators or

Nursing manager for replacement

meter.

QC Interval for Controls Exceeded.

Controls must be performed before

testing.

Press 1 to exit. Perform the control

tests indicated in the message.

The Upload Interval Exceeded. Press 1 to exit, or if it appears,

press 2 to continue testing. Place

the monitor in the docking station.

The room temperature is outside the

limits for testing.

Ensure that the room temperature is

within the specified limits. Press 1 to

exit.

The test strip was inserted at the wrong

time. The monitor will beep if functions

are attempted before the strip is removed

or if the test strip is left in when the test

calls for the test strip to be removed.

Remove the test strip from the test

strip port.

The scanned Patient 9-10 digit CSN is

similar in format to the test strip barcode.

1. Re-enter the patient 9-10 digit

CSN using the barcode scanner

or the keyboard.

2. Contact the POCT Coordinators

if the problem persists.

The barcode just scanned was not read

correctly. Possible reasons are:

 The red scanner beam did not pass

across all the bars of the code

 The barcode was damaged or poorly

printed

 The barcode was not of the lot or type

specified for this ID or lot number.

1. Rescan the barcode.

2. If problem persists, contact the

POCT Coordinators.

The lot number just scanned or entered is

not on the list of acceptable lot numbers

defined for this monitor.

1. Verify and re-enter the lot

number using the barcode

scanner.

2. Manually enter the ID or lot

number.

3. If the problem persists, notify

the POCT Coordinators.

1 2 ... 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Abbott Precision XceedPro Betreibershandbuch Seite 17

Kommentare zu diesen Handbüchern